The ComforBilt HP22i Pellet Stove Fireplace Insert takes the tremendous performance and efficiency of the HP22 free-standing pellet stove and offers it as an attractive fireplace insert model with zero clearance.
Along with heated air from the room blower, the bay view window radiates heat in three different directions. The HP22i insert can heat 2,800 square feet in mild temperatures. It is also EPA and CSA Certified to comply with all federal emissions mandates.
In home delivery: delivery service will place the product in any room of your house.
Notifications for delivery scheduling with email or SMS.
Schedule a 2 hour delivery window.
Removal of all packaging material.
Available for an extra $165 at checkout.
Optional 3 inch or 4 inch Piping Kits:
ComfortBilt offers optional piping kits in 3 inch or 4 inch sizes that include venting accessories necessary to connect venting to the back of the ComfortBilt pellet stoves.
3 inch piping kits
4 inch piping kits
Do ComfortBilt Stoves use electricity?
ComfortBilt pellet stoves can only operate with electricity. They can run off of a generator or a battery backup, but only if the generator or battery backup have a pure sine wave power signature. ComfortBilt electronics are fairly sensitive and will not run on modified sine wave.
What piping kit do I need? What comes with the pipe kit? Do I need 3 inch or 4 inch pipe? Does the pipe kit come with everything I need?
For the free-standing stove models, you will need some way to vent exhaust outside, usually directly through an exterior wall.
The difference between 3 inch and 4 inch venting is in how much resistance the exhaust air will have to push through. 4 inch piping has more space and so there is less resistance; especially at elbows/bends.
3 inch venting is normally sufficient, however if you have longer total venting runs, or more than just a couple bends/elbows, it is likely you will need to use a 4 inch pellet venting system.
If you are installing at or above 5,000 feet in elevation, installing in a manufactured home, or exceeding the recommended equivalent vent length calculations, you will need a 4 inch piping kit.
How often should I clean my stove? How often should I deep clean my stove? How often should I clean my burn pot? How do I clean my stove? What exhaust gaskets can be used?
Cleaning and maintenance should be done on a routine schedule. We recommend cleaning the burn pot with every hopper load of pellets, and doing a deep chamber cleaning at least once every ton of pellets burned. This chamber cleaning is done by removing the few exhaust chamber cover plates and brushing/vacuuming out those inner chambers.
We also recommend cleaning out the piping and tee connections/elbows at about the same interval. (once per ton of pellets burned) Just to ensure a good exhaust/air flow.
The exhaust fan assembly may only need to be cleaned annually.
When performing deep cleans, it is often recommended to have replacement gaskets on hand.
You can use any high temperature gasket material, such as vehicle exhaust gaskets as a replacement. Just ensure that the gasket is able to withstand temps exceeding 500°F.
What is the difference between 3” and 4” pellet venting? Do I need the 3 inch or 4 inch piping? Do I need a fresh air intake?
The difference between the two is in how much resistance the exhaust air will have to push through. 4 inch piping has more space and so there is less resistance; especially at elbows/bends.
3 inch is normally sufficient, however if you have longer total venting runs, or more than just a couple bends/elbows, it is likely you will need to use a 4 inch pellet venting system.
If you are in a manufactured home or exceeding 4000ft above sea level, you’ll likely need a fresh air intake as well.
What happens to the pellet stove during a power outage or loss of power scenario?
In the event of a power outage, all of the powered components will cease operation. This will include the feed auger and fans. The fire will starve and eventually go out, and there may be some smoke that leaks into the room due to the exhaust fan being inactive.
How many pellets will a Comfortbilt pellet stove use per day?
Most of the stoves will consume from 1 to 5 pounds per hour of operation. External factors such as the size and insulation of the space, and the outside temperature can significantly affect this.
Most commonly, our customers report using about 1.5 - 2 bags per day of operation through the winter.
Is plugging a pellet stove into a surge protector recommended? Can Comfortbilt stoves be plugged into a GFI/GFCI outlet?
It is always recommended to use a surge protector to help protect the sensitive computer electronics.
Our products may not always work with a GFCI breaker/outlet however. Check with your local electrician for more information about GFI's.
Is the stove designed to shut the fire down when it reaches the desired temperature?
In the default "Temp" and "Manual" modes, the stove will continuously run.
Most stoves are equipped with an ECO mode function that will allow it to fully shut down when the desired temperature is met. After cooling down a few degrees, the stove will automatically reignite and bring the room back up to the desired temperature.
* Please be aware that ECO mode puts a lot more strain on the steel igniters and will wear them out much more quickly than other modes, due to the constant on/off cycling.
How loud are Comfortbilt pellet stoves? What is the decibel level of the blower fan?
With an adjustable room blower/distribution fan, they can be very quiet, especially on lower levels. While we have not officially tested the decibel levels in a lab, many of our customers say it is one of the quietest pellet stoves they have experienced.
Can Comfortbilt pellet stoves be ducted into some kind of heat duct or HVAC system?
Our stoves have an active blower fan for heat convection. It is designed to draw the cooler, lower air through the stove’s heat exchange process and redistribute the hot air out of the front, near the top of the stove. Currently, there are no supported means for ducting our pellet stoves.
Can I use this stove on a generator? What kind of backup power system will work with Comfortbilt pellet stoves?
An inverter or UPS with a pure sine wave output SHOULD work. Do not use a partial or modified sine wave output as these can damage the sensitive computer electronics within the stove, or cause certain functions not to work (most reported issue is feed related problems when running off of a generator).
Minimum 1000W, but 1500W is preferable for the larger spike draw during ignition.
Is an outside air intake required for my pellet stove installation?
A majority of installs are done without the outside air kit.
If you are installing in a mobile home, or in a garage/basement/shop setting, or if the stove is being installed at or above 5,000 ft. in elevation, then outside air is often recommended or even required.
If installing on the main level of a traditional, stick-built home at lower elevations, the stove will typically meet its oxygen demands by drawing in air from the interior. Please refer to the owner's manual for additional information.
Will losing power to the control panel reset all of the user settings of the pellet stove?
No. Unplugging your stove should not reset all of your settings. The control panel comes equipped with a backup battery installed in it. However, if you have a power outage and do not have your stove plugged into a surge protector; it can be possible to lose your settings. This is also contingent upon the life of your backup battery.
The 3V 2032 Lithium battery is located inside the controller and is accessed by removing the back of the panel.
Is it safe to change operation modes while the stove is running?
It is perfectly fine to go from manual to temperature mode (or vice versa) on your stove. However, when dealing with weekly or thermostat mode it may cause problems in the stove operation. (usually just a Fire-off shut down). We typically advise to set the mode before turning the stove is turned ON, or change between manual and temperature mode quickly to avoid the shut down.
Is it possible to burn corn or other biofuels in Comfortbilt pellet stoves?
No, Comfortbilt pellet stoves were designed and tested for premium wood pellets only.
Burning corn or other non-pellet biofuels in your stove will void your warranty and may create a safety hazard or cause damage to your stove.
You should only burn premium wood pellets in your pellet stove. Both softwood and hardwood are okay and will work fine in a Comfortbilt pellet stove.
Shipping & Returns
Estimated Product Handling: 1 to 2 business days
Please inspect your package upon delivery. If there is obvious damage, please note the damages on the delivery receipt.
Contact us within 24 hours to report the damage, by either e-mail or phone. Please retain all original boxes and packaging.
Returns (Applies to ComfortBilt products only)
All returns must be pre-authorized and require a return authorization. Please email firstname.lastname@example.org to request a return authorization.
All returns must be requested within 30 calendar days from the delivery date.
The product must be in the original packaging and include all packaging materials, crates, boxes, and pamphlets.
All returns include a 5% restocking fee.
Customers are required to pay for the cost of return freight shipping.
The final return amount will be calculated as the Purchase Price less return shipping cost less the 5% restocking fee.
See What our Customers Say:
Easy ordering and fast delivery. Enhanced Leisure even checked to make sure I was taking advantage of the current promtion they were running.
I needed to replace our pellet stove. Lou patiently answered all my questions and helped me choose the best option.
Lou answered all my questions and even checked to make sure the delivery arrived on time!